SUPPORT
YOUR SETUP
ACKCIO BEAM · STANDALONE

Use your nodes without a gateway

The node keeps its readings in its own memory. You collect the data on site with the Ackcio Nimbus app.

WHAT YOU NEED
STEP 1Prepare the nodeAll 4 guides
STEP 2Commission in Standalone mode
STEP 3Collect data on site
STEP 4Keep it running
1
STEP 1 OF 4

Prepare the node

4 guides
  1. Node overview: battery, buttons, ports and LEDsKC-02-024-SA
  2. Prepare your nodeKC-02-025-SA
  3. Download the Ackcio Nimbus appKC-02-027
  4. Wire and set up your sensors (by node type)
2
STEP 2 OF 4

Commission in Standalone mode

2 guides
  1. Commissioning in Standalone modeKC-07-001
  2. Standalone commissioning videosKC-05-008
3
STEP 3 OF 4

Collect data on site

1 guide
  1. Export data from your nodeKC-02-035-SA
4
STEP 4 OF 4

Keep it running

3 guides
  1. Update node firmware with your Android phoneKC-02-037
  2. FAQ: Battery and power managementKC-03-001-SA
  3. FAQ: HPCKC-03-002-SA

Need help?

FREQUENTLY ASKED QUESTIONS
Battery and power managementHPCGateway set-up and operationGateway and node mounting best practicesNetwork test and noise testConnectivity and networkRemote access and securityData management and SnapeNode operation and troubleshootingSensor errors and diagnosticsSpecific node types and sensorsGeneral
Using a gateway after all?

Switch to Snape 1.0 or Snape 2.0 at the top.

Still stuck?

Email support@ackcio.com.