Sensor wiring and set-up: overview
Snape 2.0Version 1.1 · 6 November 2026KC-04-001
This guide is for Snape 2.0. Other versions: Snape 1.0 and Standalone.
Nodes covered in this guide:
- BEAM-AN : Analogue Node: voltage, current loop, resistance sensors
- BEAM-VW : Vibrating Wire Node: VW sensors, piezometers, strain gauges
- BEAM-DG : Digital Node: RS485/RS232/SDI-12 digital sensors
- BEAM-TM : Tilt Monitoring Node: integrated MEMS sensor (no external wiring)
- BEAM-RN : Repeater Node: no sensor connection required
- BEAM-TM-L : Long-range TM-L Node (LORA): no sensor connection required