Node summary panel | Ackcio Support

Once you commissioned your nodes, your nodes will appear in the node summary panel. Here you will find information on the Node’s current connection status, signal strength, and battery level. Below we see an example of a node connected properly as indicated by the green tick. Underneath that node we see an example of a node that requires some attention. The triangular icon indicates that the node is missing from the network, and the red battery shown in the battery icon indicates that the battery on this device may need to be replaced.

The sampling rate of each of your nodes can also be viewed and changed from this panel. A timestamp for the last update received from the node by the gateway is also displayed in this panel. Sampling can be changed from 5 mins to 24 hours. If nodes need to be deployed at lower sampling rate, it’s possible provided we limit the number of nodes per GW. 1 min = max 10 nodes, 2 mins = max 20 nodes, and so forth up to 5 min = max 50 nodes per GW. For this to work, both Snape and Nimbus must be running on the latest version.